← Back to Blog

How to Calculate Average Atomic Mass (With Worked Examples)

November 8, 2026 · 6 min read · Periodic Table Online

Calculate average (relative) atomic mass from isotopes, step by step, with chlorine, copper, magnesium, boron and mass spectrum examples.

average atomic massrelative atomic masshow to calculate average atomic massrelative atomic mass calculationisotopesmass spectrumweighted average atomic mass

Advertisement

Look at chlorine on the periodic table and you will see a mass of 35.45. No chlorine atom actually has that mass. The number is an average: natural chlorine is a mixture of two isotopes, and 35.45 is their weighted mean. This guide shows how that average is calculated, and how to answer the exam questions built around it.

In the US this is usually called average atomic mass. In the UK and India the same idea is called relative atomic mass, written Ar. The method is the same.

Isotopes in one paragraph

Every atom of an element has the same number of protons, but the number of neutrons can vary. Atoms of the same element with different numbers of neutrons are called isotopes. Chlorine-35 has 17 protons and 18 neutrons; chlorine-37 has 17 protons and 20 neutrons. Both are chlorine, but chlorine-37 is heavier. If you need a refresher on counting these particles, see how to find protons, neutrons and electrons.

The formula

Average atomic mass = (mass of isotope 1 × its abundance) + (mass of isotope 2 × its abundance) + …

The abundance must be written as a decimal fraction (75.76% becomes 0.7576). If you are given percentages, you can also multiply by the percentages and divide the total by 100. Both give the same answer.

Relative atomic mass is measured on a scale where one atom of carbon-12 is exactly 12, which is why it has no units. When you use it in calculations it becomes grams per mole, the molar mass.

Worked example 1: chlorine

Natural chlorine is 75.76% chlorine-35 (mass 34.969) and 24.24% chlorine-37 (mass 36.966).

  1. Chlorine-35: 34.969 × 0.7576 = 26.493
  2. Chlorine-37: 36.966 × 0.2424 = 8.961
  3. Add them: 26.493 + 8.961 = 35.45

That matches the value on the chlorine page. The answer is closer to 35 than to 37 because there is about three times as much chlorine-35.

Worked example 2: copper

Copper is 69.15% copper-63 (mass 62.930) and 30.85% copper-65 (mass 64.928).

  1. 62.930 × 0.6915 = 43.516
  2. 64.928 × 0.3085 = 20.030
  3. Total: 63.546

That is exactly the atomic mass on the copper page.

Worked example 3: the GCSE-style version

At GCSE you are usually given mass numbers and percentages rather than exact isotope masses. Magnesium is 79% magnesium-24, 10% magnesium-25 and 11% magnesium-26.

Ar = (24 × 79 + 25 × 10 + 26 × 11) ÷ 100

Ar = (1896 + 250 + 286) ÷ 100 = 2432 ÷ 100 = 24.3

The periodic table value for magnesium is 24.305, so the shortcut gives the right answer to one decimal place.

Worked example 4: finding the abundance (working backwards)

Some questions give you the average and ask for the percentages. Boron has an average atomic mass of 10.81 and two isotopes: boron-10 (mass 10.013) and boron-11 (mass 11.009). What percentage is boron-10?

Let the fraction of boron-10 be x. Then the fraction of boron-11 is 1 − x, because the two must add up to 1.

10.013x + 11.009(1 − x) = 10.81

11.009 − 0.996x = 10.81

0.996x = 0.199, so x = 0.200

Boron is about 20% boron-10 and 80% boron-11. The measured values are 19.9% and 80.1%, so the calculation is right. You can check the result on the boron page.

Reading a mass spectrum

A mass spectrometer separates the isotopes in a sample by mass. The result, a mass spectrum, shows one peak for each isotope. The position along the bottom (m/z) gives the isotope's mass, and the height of the peak gives how much of it there is.

Peak heights are often given as relative values rather than percentages. For chlorine, the chlorine-35 peak might be labelled 100 and the chlorine-37 peak 32.0. To find Ar, divide by the total of the heights, not by 100:

Ar = (35 × 100 + 37 × 32.0) ÷ (100 + 32.0) = 4684 ÷ 132.0 = 35.5

This is the most common source of lost marks: dividing by 100 when the heights do not add up to 100.

Why the periodic table shows decimals

  • Most elements have several isotopes, so their average is not a whole number. That is why the periodic table shows 35.45 for chlorine rather than 35 or 37.
  • Elements with only one stable isotope have masses very close to whole numbers: fluorine 18.998, sodium 22.990, aluminium 26.982.
  • Radioactive elements with no stable isotopes are often shown with the mass number of their longest-lived isotope in brackets, such as francium [223].
  • For a few elements the value varies slightly in nature. Lithium, boron and carbon, for example, have slightly different isotope mixtures depending on where a sample comes from. IUPAC publishes the agreed values, and that is why some tables round differently.

You can see every element's mass on the interactive periodic table, or print the molar mass chart from our periodic table PDF page.

Common mistakes

  • Using percentages without dividing by 100, which gives an answer 100 times too large.
  • Adding the isotope masses and halving them. That is an unweighted average and only works if the isotopes are exactly 50:50.
  • Abundances that do not add up to 100%. Always check your fractions total 1.
  • Answers outside the range of the isotopes. The average must lie between the lightest and heaviest isotope, and closer to the most abundant one. If it does not, something has gone wrong.

Where you will use it next

Average atomic masses become molar masses in g/mol, which you need for converting between grams and moles. Our molar mass calculator solves mass, moles or molar mass, and the stoichiometry guide shows how molar mass fits into reaction calculations.

Practice questions

  1. Gallium is 60.1% gallium-69 (68.926) and 39.9% gallium-71 (70.925). Find its average atomic mass. 69.72
  2. Bromine is 50.69% bromine-79 (78.918) and 49.31% bromine-81 (80.916). Find its average atomic mass. 79.90
  3. An element has two isotopes, mass 6 (7.5%) and mass 7 (92.5%). Find Ar and name the element. 6.9, lithium

Advertisement

More Chemistry Articles

How to Find Protons, Neutrons and Electrons in Any Atom

November 8, 2026 · 5 min read

Find protons, neutrons and electrons in any atom, isotope or ion with three simple rules, worked examples and practice questions.

Stoichiometry Isn't Hard (Here's the Method That Actually Works)

November 2, 2025 · 15 min read

Stoichiometry has a reputation for being difficult. It's not. Here's the systematic approach that makes any stoichiometry problem straightforward.

GCSE and A-Level Chemistry: Mastering the Periodic Table for UK Exams

January 20, 2026 · 11 min read

A comprehensive guide to the periodic table for GCSE and A-Level Chemistry students in the UK. Covers AQA, OCR, and Edexcel syllabi with exam-focused tips and mark scheme insights.